VWBB - More Weapon Woes.

Pages (2): [1] 2 »
Show all 21 posts from this thread on one page

VWBB (http://volitionwatch.papageorgefamily/vwbb/index.php)
- FreeSpace 1/2 MODs Discussion (http://volitionwatch.papageorgefamily/vwbb/forumdisplay.php?forumid=40)
-- More Weapon Woes. (http://volitionwatch.papageorgefamily/vwbb/showthread.php?threadid=7908)

Posted by Deathstorm on 12-10-2002 07:57 PM:

More Weapon Woes.

I've been playing around with beams lately, but theres one TBL entry I don't understand:

"Zadd"

What does it do? I'd experiment to find out, but my computer blew itself up and is currently halfway across the country being repaired.

__________________
In Fine Solum Unum Potest Esse

Posted by Deathstorm on 12-10-2002 07:57 PM:

More Weapon Woes.

__________________
In Fine Solum Unum Potest Esse

Posted by GalacticEmperor on 12-10-2002 08:26 PM:

Ooh, I asked about this a while ago on HLP. Let me see if I can find it...

Found it. "It's exactly what it sounds like-- "Z Add". It adds a depth displacement to layers of the beam to help FS2 knows which layers are supposed to be rendered in front of each other."

__________________
Palpy uber alles!
-Woolie Wool

Galemp, you should be shoved into the intake of a Boeing 777.
-Mikhael, upon seeing my [url=http://dynamic4.gamespy.com/~freespace/forums/showthread.php?s=&threadid=19105]FS uglies[/url]

[url=http://www.3dap.com/hlp/hosted/fsport/]Revisit the Great War at the Freespace Port![/url]

Posted by GalacticEmperor on 12-10-2002 08:26 PM:

__________________
Do Vasudans have teeth?
-Petrarch

[url=http://www.3dap.com/hlp/hosted/fsport/]Revisit the Great War at the Freespace Port![/url]

Posted by Alikchi on 12-11-2002 04:48 AM:

I think he would like that in English

__________________

[url=http://www.3dap.com/hlp/hosted/ntv]NTV - Join the Stupid Cattle![/url]

Posted by Someone on 12-11-2002 09:45 AM:

Well...I do, anyways.

*isn't too technical with stuff like that*

__________________
*is lost, but then...*
*Oh well...*
*...I think*

**the above: Someone in a nutshell...see? He's IN a nutshell...**

Posted by Someone on 12-11-2002 09:45 AM:

Well...I do, anyways.

*isn't too technical with stuff like that*

__________________
*is lost, but then...*
*Oh well...*
*...I think*

**the above: Someone in a nutshell...see? He's IN a nutshell...**

Posted by Deathstorm on 12-11-2002 03:29 PM:

Actually, I thought he explained it just fine. Basically what I think GalacticEmperor was saying is the Zadd specifies the distance that the section appears in front of the previous one.

Example: If I understand correctly it works like this: Section 2 has a Zadd value of 1. This means it will appear 1 meter further forward than the point that section 1 appears.

A slightly different question now. Does anyone know where I can download the complete GTB Surt package (with railgun). So far, I've never found a .pof for the surt, and I might have lost all my mods.

__________________
In Fine Solum Unum Potest Esse

Posted by Deathstorm on 12-11-2002 03:29 PM:

__________________
In Fine Solum Unum Potest Esse

Posted by Shrike on 12-11-2002 06:27 PM:

Gives the beams a fake roundness, basically. 3-D effect.

'Z' is the dimension in/out of the screen, if that helps.

__________________
WE ARE HARD LIGHT PRODUCTIONS. YOU WILL LOWER YOUR FIREWALLS AND SURRENDER YOUR COMPUTERS. WE WILL ADD YOUR INTELLECTUAL AND VERNACULAR DISTINCTIVENESS TO OUR OWN. YOUR FORUM WILL ADAPT TO SERVICE US. RESISTANCE IS FUTILE.

Posted by Shrike on 12-11-2002 06:27 PM:

Gives the beams a fake roundness, basically. 3-D effect.

'Z' is the dimension in/out of the screen, if that helps.

Posted by BabProj Team on 12-11-2002 07:03 PM:

SSSooooo...in english it means that if you have Beam1.pcx through Beam3.pcx and Beam1.pcx has a size of 40 and Beam3.pcx has a size of 15 you definately want the Beam3.pcx to be further forward so Beam3.pcx should have a Zadd of something higher than Beam1.pcx.

Ok...so that wasn't so clear.

Beam1.pcx
Width: 40
Zadd: 1

Beam2.pcx
Width: 25
Zadd: 2

Beam3.pcx
Width: 15
Zadd: 3

So Beam 3 will appear ontop of 2 and 1. This is just a layering effect...like Shrike said, to give it an element of being 3D.

__________________
- The Babylon Project Team

Posted by IceFire on 12-11-2002 07:03 PM:

__________________
- IceFire
Volition Watch Project Manager
[url=http://www.volitionwatch.com]Volition Watch[/url], [url=http://freespace.volitionwatch.com/blackwater]BlackWater Operations[/url], [url=http://freespace.volitionwatch.com/babylon]The Babylon Project[/url], [url=http://terra.sourceforge.net]Machina Terra[/url], [url=http://www.3dap.com/hlp/hosted/ott/]Over The Top[/url]

Posted by Bobboau on 12-11-2002 07:57 PM:

yes but Zadd is suposed to only go from 0.0 to 1.0, though nothing bad would happen, but if you when to 8 or so you'd probly start getting errors

__________________
Bobboau, bringing you products that work ......... In theory

Posted by Bobboau on 12-11-2002 07:57 PM:

yes but Zadd is suposed to only go from 0.0 to 1.0, though nothing bad would happen, but if you when to 8 or so you'd probly start getting errors

__________________
Bobboau, bringing you products that work ......... In theory

Posted by BabProj Team on 12-11-2002 08:02 PM:

Really? 0.0 to 1.0? I thought a whole bunch of V tables had values well over that.....I must check that.

__________________
- The Babylon Project Team

Posted by IceFire on 12-11-2002 08:02 PM:

Really? 0.0 to 1.0? I thought a whole bunch of V tables had values well over that.....I must check that.

Posted by aldo_14 on 12-12-2002 12:16 AM:

quote:
Originally posted by Deathstorm
Actually, I thought he explained it just fine. Basically what I think GalacticEmperor was saying is the Zadd specifies the distance that the section appears in front of the previous one.

Example: If I understand correctly it works like this: Section 2 has a Zadd value of 1. This means it will appear 1 meter further forward than the point that section 1 appears.

A slightly different question now. Does anyone know where I can download the complete GTB Surt package (with railgun). So far, I've never found a .pof for the surt, and I might have lost all my mods.

The Surt was in my modeldump (2) file. Don't know the location offhand, though.

__________________
VBB Survivor - Mar 2001 to 12 April 2002 - 1107 posts

Hit it 'til it gives up....

[URL=http://www.3dap.com/hlp/hosted/reciprocity]RECIPROCITY[/URL] [URL=http://www.3dap.com/hlp/hosted/reciprocity/demo.html]The Luyten Incident[/URL]
[URL=http://www.3dap.com/hlp/hosted/reciprocity/casualtiesofwar/main.htm]Casualties of War[/URL]
ICQ: 119819902

Posted by aldo_14 on 12-12-2002 12:16 AM:

quote:
Originally posted by Deathstorm
Actually, I thought he explained it just fine. Basically what I think GalacticEmperor was saying is the Zadd specifies the distance that the section appears in front of the previous one.

Example: If I understand correctly it works like this: Section 2 has a Zadd value of 1. This means it will appear 1 meter further forward than the point that section 1 appears.

A slightly different question now. Does anyone know where I can download the complete GTB Surt package (with railgun). So far, I've never found a .pof for the surt, and I might have lost all my mods.

The Surt was in my modeldump (2) file. Don't know the location offhand, though.

Posted by Deathstorm on 12-12-2002 03:54 PM:

Is that the compete file or just the Surt itself?

BTW, I love that pirate fighter you just released!

__________________
In Fine Solum Unum Potest Esse

All times are EST. The time now is 06:12 PM.

Pages (2): [1] 2 »
Show all 21 posts from this thread on one page